Tel: +8618638023690
Email: 13014650631@163.com

Copper rod aluminum rod forging induction heating equipment

Copper rod aluminum rod forging induction heating equipment The copper rod aluminum rod forging heating equipment belongs to the induction heating type heating equipment, and the most prominent advantages of induction heating forging and traditional heating forging are embodied in that induction heating does not produce an open flame...

Chat Now
Products Specifications:

Copper rod aluminum rod forging induction heating equipment

The copper rod aluminum rod forging heating equipment belongs to the induction heating type heating equipment. The most prominent advantages of the induction heating forging and the traditional heating forging are embodied in that the induction heating does not generate an open flame, and the possible occurrence of dangerous events such as fire and explosion is eliminated, and safety Greatly improve. At the same time, it does not produce exhaust gases and dust such as carbon monoxide, carbon dioxide, and sulfur oxides. The external radiation has low heat, low noise, and the working environment can be purified and the health level can be guaranteed.


Copper rod aluminum rod forging heating equipment main features:
1, for the copper rod, iron rod, aluminum rod heating;
2, ultra-small size, mobile, covers an area of only 0.6 square meters, convenient and any forging and rolling equipment With the use of;
3, installation, debugging and operation is very convenient, a school that is;
4, induction heating, so that the bar can be heated to the required temperature in a very short time, greatly reducing Metal oxidation, not only saving material but also improving forging quality;
5, IF heating Φ15 above bar, more heat, more uniform and faster;
6, 24 hours of continuous work;
7, automatic feeding;
8, Power saving, environmental protection, cost reduction and manpower expenditure;
9, to facilitate the replacement of the furnace body, to adapt to the bar or the overall heating of the end of the different requirements;
10, using ultra-small mid-frequency induction heating power supply, and the traditional intermediate frequency power supply is very different;


Copper rod aluminum rod forging heating equipment - The main features of the product: adjustable power, induction heating, more thorough heat penetration, fast heating, high efficiency, substantial energy saving, power saving, intermediate frequency can be installed infrared thermometer temperature is easier Control, heating a wide range, strong applicability, only metal induction heating, safer, more environmentally friendly!


Copper rod aluminum rod forging heating equipment Main applications:
1. Heat-through forging of round steel with a diameter of 700 mm or less for diathermic forging, with an output of 750 kg per hour.
2. The shaft can be quenched to shaft diameter below 250mm quenching, quenching depth 2-6mm.
3. The gears can be quenched to a diameter of 250mm and the following gears are quenched. The sleeve roller chain theory can be quenched to a diameter of 900mm. The module 50 can be quenched by a single tooth with a depth of 2-6mm.
4. Large-scale base rail quenching, quenching depth 2-6mm.

螺母螺栓透热锻造

IMG_20180328_095402_副本


Hot Tags: Copper rod aluminum rod forging induction heating equipment, China, manufacturers, factory, customized, price
Related Products